Crestron to Clipsal C-Bus module

This module will control a C-Bus lighting group. It allows real time ramping, on/off control as well as emulation of a C-Bus one-touch dimmer button.

This module will control a single group on the C-Bus network.

It will work with both local and bridged (remote) networks provided the group numbering is discrete across all the networks.

This module also allows the polling of the appropriate C-Bus output units (hard wired only) to determine the status of the corresponding group.

The module allows for the switching, dimming or ramping of said group.

Relay units can be controlled by using the Group_On & Group_Off functions only.

Typically lights can be controlled from a single digital button connected to the “One_Touch_Button” input for each group or zone.

This button emulates the operation of the C-Bus dimmer button where a short press will toggle the state of the group; a long press will ramp the group up or down.

Scenes can be created via an analogue store / preset which triggers the “Start_Ramp” input for the lights to be controlled in that group.

This module will track any changes that occur on the C-Bus network and will set switching and ramping accordingly.

This module includes the C-Bus_Comms module which controls the sending and receiving of serial data from the C-Bus PC interface.

This module includes a sample program & touch screen design. Only AU$300.00 + 10% GST.

NB – Tax only relevant to Australian sales.